How do you change a side marker light?
Remove the bulb and socket from the side marker lens assembly, a counterclockwise twisting motion usually will allow you to pull the socket out of the lens. Unbolt or unscrew the side marker light assembly from the vehicle and remove the damaged assembly. Install new side marker light assembly on the vehicle.
Where are marker lights on a car?
Side marker lights are auxiliary safety lights that give other drivers a clear view of your vehicle’s position and direction of travel from various angles. They illuminate with your vehicle’s headlights or blink with the directionals and are usually located near your vehicle’s bumper, fender, or rear quarter panel.
How do side marker lights work?
Side marker lights have single wires, usually of 16-gauge thickness, which lead from the bulb socket to the parking light wire, taillight or main headlight wire loom. They use the standard automotive 12 volts for operation and activate when the headlights are turned on.
What does marker light mean?
Marker lights are designed to tell other motorists about the other vehicles on the road. They indicate things like vehicle size, vehicle shape, and direction of travel. Generally speaking, amber marker lights designate the front of a vehicle and red marker lights designate the rear of a vehicle.
What color are side marker lights?
Color of clearance lamps, side marker lamps, reflectors, and backup lamps. (1) Front clearance lamps and those marker lamps and reflectors mounted on the front or on the side near the front of a vehicle must display or reflect an amber color.
How do you remove the side marker on a FRS?
In the wheel well, locate the plastic fastener behind the side marker. Use the phillips head screwdriver to gently rotate the center part of the fastener counter-clockwise. It should pop out on its own and you can pry both parts out of the hole with your fingers. Save this piece; you’ll need to install it again later.
What causes a light bulb to burst in a Kia Rio?
Residual oil may cause the bulb to overheat and burst when lit. A bulb should be operated only when installed in a headlight. If a bulb becomes damaged or cracked, replace it immediately and carefully dispose of it. Wear eye protection when changing a bulb. Allow the bulb to cool down before handling it.
Can you replace light bulbs on a Kia?
Otherwise, it may cause damage to the fuse or electric wiring system. If you don’t have necessary tools, the correct bulbs and the expertise, consult an authorized Kia dealer. In many cases, it is difficult to replace vehicle light bulbs because other parts of the vehicle must be removed before you can get to the bulb.
Can a parking light burn out on a Kia Sportage?
It is possible for the turn signal portion of the bulb to burn out and for the parking light to continue to function properly and vice versa – replacing the bulb will restore functionality of both in your Sportage.
What to do when changing your parking light?
When changing the parking light in your Rio, be careful not to touch the glass part of the new bulb with your finger as this will cause it to burn out quicker. We recommend using gloves or a piece of paper towel to limit the potential of touching the bulb.