What does F08 mean on washing machine?
This is info i had come up with, F08 indicates that the heater is an open circuit. Check the heater wires for dislodged or burnt wires and check the heater for continuity with a meter.
How do I fix e01 F08 on my Whirlpool washer?
A F08-e01 error code shows when there is a lack of water supply going to your washer. First you should check to see that both the hot and cold faucets are turned on and connected properly to your washer. Both faucets need to be turned on in order for the washer to run correctly.
What is F08 error?
F08 indicates that the heater is an open circuit so check the heater for continuity with a meter. F12 relates to an element short or the heater has failed completely so replace if necessary. Fault code F09 on some machines is an overflow error, which indicates that water has been found on the base of the appliance.
How do I fix F8 error on washing machine?
If F8 E1 or LF (too long to fill) appears in display, it means the washer is taking too long to fill. It’s possible the drain hose extends more than 4.5″ (114 mm) into standpipe. Check plumbing for correct drain hose installation. Use drain hose form and attach securely to drainpipe or tub.
What does F8 mean on Hotpoint washing machine?
Heater relay
F8 – Heater relay stuck. As above this fault indicates a problem with the heating system in your machine and could also be caused by the pressure switch.
What does F08 mean on a Hotpoint Dryer?
Heater fault Issue
F08 — Heater fault. Issue: During a wash cycle the programme pauses part way through. Advice: We recommend you call our customer service centre to book an engineer on: 0344 822 4224. F09 — Software fault. Issue: Tumble Dryers isn’t operating multiple flashing lights and/or display.
What does F8 mean on a Whirlpool washing machine?
If the washer has an F8 E1, LF, or LO FL error, the door will be locked, and the control will be unresponsive. Press the power button, and the washer will start a drain routine which takes approximately 8 to 10 minutes, during which time the pump will run continuously.
What does F08 mean on a Maytag washing machine?
The error code means that your washing isn’t detecting the water coming into your machine. The flow meter is detecting the water that is coming into your machine isn’t an adequate pressure or flow.
What does F8 e3 mean on a Whirlpool washer?
The F8E3 Error Code indicates that there may be an internal overflow from the water inlet valve. Verify that the drain hose and drain pump filter are not plugged.
How do I fix the F28 code on my Whirlpool Duet washer?
An F28 error code is a common problem that means there is a communication problem with the central control unit. This problem is generally solved by essentially rebooting the control unit. Rebooting the control unit is accomplished in less than 10 minutes, even by the novice.
What does f2 mean on Hotpoint washing machine?
Hotpoint Washing Machine Error Codes
| Error Codes | Fault Type |
|---|---|
| F02 | Motor fault |
| F03 | Temperature sensor fault |
| F04 | Blockage or pump issue |
| F06 | Door lock problem |
Why has my condenser dryer stopped working?
The most common reason for this is because the condenser has become blocked, much like your filter. Getting rid of this blockage is often the simplest and easiest way of getting your tumble dryer condenser to work properly again.
