Where is the OBD2 port on 2005 Honda Accord?


Where is the OBD2 port on 2005 Honda Accord?

OBD connector location for Honda Accord 8 (2007 – 2015)

  1. The OBD2 socket is located under the steering wheel in the fuses box.
  2. OBD socket is near the hood lever.
  3. You can see the diagnostics port near the fuses.

What is code P1259 for a Honda Accord?

The most common cause for Error Code P1259 or VTEC system malfunction is low oil pressure. If it’s in bad condition, then replace it with real original Honda oil pressure switch. Lastly, you could have a restricted VTEC solenoid passage, or faulty VTEC solenoid or wiring.

How many OBD2 ports does a car have?

It is also the primary location of tracking devices such as dongles as the port provides ongoing power to the device. There are two generations of OBD ports, OBD1 and OBD-ii aka OBD2. To determine which one you have, if your vehicle was built and sold in the US after January 1st, 1996 you will have an OBD 2 port.

Where is the OBD2 port on a 2007 Honda Accord?

The 2007 honda accord obd2 port is located under the dashboard near the steering column on the drivers side footwell.

Where is the OBD port on a 2005 Honda Civic?

OBD connector location for Honda Civic 7 (2001 – 2005)

  1. The OBD II plug is located above the pedals on the right.
  2. The connector is on the top right of the gas.
  3. Here is the OBD II plug.

How do I use Autozone fix Finder?

How to Check your own Check Engine Light with Fix Finder Self-Service

  1. Safety first.
  2. Ask to borrow the Scan Tool.
  3. Locate the Data Link Connector (DLC)
  4. Turn on the ignition, but don’t start the engine.
  5. Wait 5 seconds, then plug in the reader.
  6. Let the reader, read.
  7. Write down vehicle information and mileage.

Where is the OBD connector on a Honda Accord?

OBD connector location for Honda Accord (1997 – 2002) You will find below several pictures which will help you find your OBD connector in your car. OBD Connector is located on the central console (passager side) Go to the OBD2. scanner for HONDA. OBD is cover with carpet, pull on it to see the connector.

Where is my OBD2 port in my car?

The norm states that the port must be located inside the vehicle passenger compartment. Depending on the make and model, it may or may not be easy to locate. To diagnose your vehicle yourself, download our EOBD-Facile car diagnostic software. Use our search engine below to locate your OBD2 port!

How many pins does an OBD connector need?

In order to save you time, we have made available (for free) the information uploaded by our community of tens of thousands of users. Since the implementation of the OBD standard, each vehicle has a standard 16-pin connector, as described on our OBD presentation page.

About the author

Add Comment

By Admin

Your sidebar area is currently empty. Hurry up and add some widgets.