How do you measure a 10 inch or 12 inch rough-in for a toilet?
Take the cover off of the toilet tank, and lay the toilet on its side to access the underside of the base. Measure from the back edge of the base to the center of the closet hole, or drain hole. Note if the measurement is 10 inches or 12 inches.
How do you measure a toilet?
Measure from the wall behind the toilet to the center of one of the closet bolts (which hold the toilet down). If the toilet has four closet bolts, measure to the center of one of the rear ones. Then measure from the center of the mounting holes to the back of the new toilet you’re considering.
What does a 10 inch toilet mean?
A 10-inch rough-in is the usual measurement installed in older homes. However, the 12-inch measurement is the standard for modern toilet plumbing. The 10-inch rough-in measurements are still sometimes found in homes, and a lesser number of toilets are normally available for them.
Can you replace a 10 inch rough in toilet with a 12-inch rough in toilet?
The rough-in for your bathroom plumbing should match the rough-in for the toilet. Even if a toilet is designed for a 10-inch rough-in, you can still install it in a space with a 12-inch rough-in.
Are all toilet seats a standard size?
No, there isn’t a standard size for all toilet seats, due to a variety of toilet styles. There are key measurements that you will need, even though most seats are adjustable to fit the most common toilet bowl shapes. The measurements are: The distance between the fixing holes – where the screws are.
Can you replace a 14 inch rough-in toilet with a 12 inch rough-in toilet?
Replace a 14-inch rough-in toilet with a 12-inch rough-in toilet. You can definitely replace a toilet with a rough-in of 14 inches with one with a rough of 12 inches. The problem with this method is that a 2-inch gap will be left between the toilet tank and the wall. Install an offset toilet flange.
Can you replace a 10 inch rough in toilet with a 12-inch?
How far from the wall should a toilet rough-in Be?
12 inches
The toilet rough-in refers to the distance from the finished wall to the center of the toilet’s floor drain or waste outlet. Most toilets have a rough-in of 12 inches, although it’s not uncommon for older homes to have an unusual size such as 10″ or 14″.
Are toilets standard size?
Overall, a standard toilet will be between 27 and 30 inches deep, with a back height of 21 to 31 inches and a width of about 20 inches. An ADA-compliant version needs to have a seat height of 17 to 19 inches.
What are the proper measurements for setting a toilet?
A toilet shall not be set closer than 15 inches from its center to any side wall,partition or vanity.
What are the standard dimensions of a toilet?
Most toilets are about 26” tall with a seat height of anywhere from 14 to 16 inches. Standard Tank Width: 18.75 inches Standard Toilet Depth: 27.5 inches Standard Toilet Height: 26 inches Standard Toilet Seat Height: 14-16 inches
What is a standard size for a public toilet stall?
A simple overhead layout is the best route for all toilet partition quotes.
What are standard toilet installation dimensions?
Standard Toilet Dimensions & Minimum Requirements. 24 to 30 inches in front of a toilet (or bidet) is standard; 21 inches is the minimum required. 16 to 18 inches is the standard distance between the center of a toilet and a wall (or obstacle) 17 to 19 inches is the standard height of a toilet seat.
