How do I figure out how many roofing sheets I need?
Divide the total roof area by the effective area of a single sheet and round up the result to the next whole number. The result is the number of sheets required.
Can you use 1/2 inch plywood roofing?
For rafters spaced 20 or more inches apart, 1/2- or 5/8-inch plywood is recommended. The most common rafter spacing is 24 inches, and 5/8-inch plywood is recommended for that. It will support roof loads for most situations and is the standard for most roof applications.
How much is a sheet of plywood for roofing?
Your price could vary depending on how much the roofing company charges for labor, but generally, you can expect to spend between $70 to $100 for each sheet of plywood. A 4 x 8 sheet of plywood covers about 32 square feet of roof area—and the average roof measures about 3,000 square feet.
How many sheets of plywood do you need for a roof?
Divide the total roof area by 32 to get the number of sheets you will need to cover the roof. A typical 4 foot by 8 foot sheet of plywood covers 32 square feet. If your roof area is 1,600 square feet, 1,600 divided by 32 will mean you need about 50 sheets to cover the roof. Add 10 percent to allow for waste.
What is better for a roof OSB or plywood?
Plywood Holds the Moisture Advantage Over OSB When plywood gets wet, it tends to swell. OSB takes longer than plywood to get saturated, but also takes much longer to dry out. When used as roof sheathing, this tendency to hold moisture means it will degrade faster than plywood when exposed to chronic leaks.
How many bundles of shingles does it take to cover a sheet of plywood?
Each plywood sheet is 4 x 8 feet or 32 square feet, which coincidentally is almost exactly equivalent to the coverage of one bundle of traditional three-tab shingles.
What is the minimum thickness of roof sheathing?
19/32-inch
Sheathing must be a minimum of 19/32-inch thick. Never affix roof sheathing with staples; 8d ring-shank nails need to be used instead. The normal thickness range for sheathing is 3/8 to 3/4 inch.
How many sheets of drywall do I need for 1000 square feet?
For example, if your wall surface is 1,000 square feet and you’re using 4′ x 8′ sheets, then the number of sheets needed is 1,000 ÷ 32, or 31.25.
